Scroll omlaag
September 22, 2026 Shipping sterile RTU vials is a configuration-specific control activity. Packaging that leaves the factory intact must remain protected through loading, air or sea transport, storage and receipt. A clean receiving record does not replace transport simulation, shelf-life evidence or a packaging-integrity report.
Record the vial SKU and drawing revision, Nest & Tub or Tray format, sterile barrier components, carton and pallet configuration, label revision, shipment mode, route, expected duration and receiving site. Keep the approved packaging specification with the shipment record.
Sea freight may involve longer dwell times, transshipment, container humidity and condensation. Air routes may involve pressure changes, ramp exposure and multiple handling transfers. Road legs and warehouse stacking also contribute to the load history. Confirm which conditions and durations the selected configuration’s evidence covers; changing mode or route may require reassessment. Do not infer an approved cold chain, temperature range, stack height or transit duration without configuration-specific limits.
| Risk | What to define | Evidence or action |
|---|---|---|
| Drop and impact | Handling height, corner exposure and pallet stability for the selected pack | Configuration-specific transport simulation or qualified handling evidence |
| Vibration | Road, air or sea vibration profile and duration | Route assessment and agreed inspection criteria |
| Compression and stacking | Maximum stack load, pallet pattern and warehouse conditions | Approved packaging limits and carrier instructions |
| Moisture and temperature | Container, warehouse and seasonal exposure relevant to the route | Packaging protection and any required monitoring record |
Do not publish a universal transport qualification, shelf life or opened-pack use period. Simulation, package-integrity reports, storage conditions and any in-use time after opening must be requested for the actual SKU, packaging revision, sterilization route and destination.
Do not open a sterile barrier in the receiving area merely to complete this checklist. Mark inaccessible checks as deferred to the approved controlled transfer/opening stage. Visual inspection cannot establish sterility or exclude hidden package defects. Quarantine the affected units and assess the wider shipment when a critical discrepancy is found. Photograph the outer condition and preserve labels, seals and shipping records before opening or repacking.
| Check | Pass condition | Record |
|---|---|---|
| Outer carton and pallet | No collapse, puncture, crushing, broken bands or unexpected wetting | Photos, carrier note, pallet and carton IDs |
| Labels and traceability | Batch, SKU, quantity, destination and handling labels match the release documents | Label revision, batch record and discrepancy notes |
| Sterile barrier | Accessible sterile-barrier seals and bags show no visible tears, holes, wetting or delamination; inspect deeper layers only during the approved controlled opening sequence | Bag and seal observations, photos and disposition |
| Packaging supports | Where visible without breaching the sterile barrier, nest, tub or tray shows no displacement or damage; otherwise record deferred inspection | Format, cavity or position check and affected quantity |
| Moisture or contamination signal | No visible condensation, staining or foreign matter on accessible surfaces; do not open or smell the sterile pack as an inspection method | Quarantine decision and investigation reference |
| Opening and use status | Opening date, operator, clean-area transfer and site-defined use window are recorded | Opened-pack label and local procedure reference |
Use the current approved specification, batch labels and quality agreement for storage conditions and unopened shelf life. A provisional or development-stage duration is not a commercial shelf-life commitment. If the applicable expiry or supporting evidence is missing or conflicting, hold the material for clarification rather than assigning a default period.
Opening the bag or sterile barrier changes the protection conditions. Agree the maximum time from each opening step to use under the facility’s qualified transfer and aseptic process, including pauses and interventions. Record opening and use times. Do not assume unopened shelf life applies after opening or that re-closing a bag restores its validated status.
Hold and notify the agreed quality contact for a torn or wet sterile bag, broken seal, missing or conflicting label, crushed packaging that could affect the sterile barrier, evidence of contamination, unexplained quantity variance or a temperature or route excursion where controls apply. Do not re-label, re-bag or release affected material without the customer quality procedure and documented disposition.
LINUO can coordinate a controlled request for the applicable packaging specification, transport simulation, storage or shelf-life evidence, package-integrity report and receiving disposition guidance. These documents are configuration-specific and are not implied by a general product-page statement.
Use the contact route with the SKU, packaging revision, shipment mode, destination and required evidence. Use the RTU trial worksheet when transport handling is connected to a filling-line trial.
Nest & Tub shipping checks · Tray shipping checks
Record observations under your approved receiving procedure. Do not open the sterile barrier in the receiving area. Download or print your record before leaving; entries are not saved or submitted to LINUO. This checklist is not a validation report or QA release authorization.
We will reply to you within 24 hours. If for urgent case, please add WhatsApp/WeChat: +8615953131507, Or call +8618615646416 directly.
*We respecteren uw vertrouwelijkheid en beschermen al uw gegevens.
We zullen uw gegevens uitsluitend gebruiken om op uw vraag te reageren en zullen nooit ongevraagde e-mails of promotionele berichten sturen.
